cnc retrofits and stepper motors
cnc retrofits and stepper motor controller manuals at http://www.motiongroup.com
cnc retrofits and stepper motors




15mm Belts and Pulleys
5mm HTD Pitch & 15mm Wide (0.2" Pitch)

15mm Belt
Pitch Length
Number of Grooves
15mm Part No.
...Inch | MM
22.24 | 565
113
EPS0113G15mN
5mm HTD Pitch, 15mm Belt Width, Double Flange

15mm Pulley
Number of Grooves
Pitch Diameter
Outside Diameter
 Flange Diameter +/- .016 Overall Flange Length +/- .016 Hub Diameter +/- .016 Standard Bore + .001 -.000 Standard Bore Pard Number
16
 1.003 .958 1.094 1.025 .625 .250 PT016G08L15T
32
2.005
1.960
 2.125 1.087 1.250 .250 PT032G08L15T
NOTE: Pulley must be reamed to required diameter of both motor and machine shafts.


Copyright © 2000,2001,2002,2003,2004, 2005 The Motion Group, Inc. All Rights Reserved
This site was last updated Sept. 2005